[Jan 06, 2024] Ultimate CT-TAE Guide to Prepare Free Latest ISTQB Practice Tests Dumps
Get Top-Rated ISTQB CT-TAE Exam Dumps Now
ISTQB CT-TAE certification is designed for professionals who are involved in software testing and automation. Certified Tester Test Automation Engineer certification validates the candidate's knowledge and skills in the area of test automation. Certified Tester Test Automation Engineer certification provides a comprehensive understanding of test automation concepts, frameworks, tools, and techniques.
NEW QUESTION # 35
What is the PRIMARY advantage of using abstraction in the TAA?
- A. It makes it more flexible for future reuse and improvements
- B. It improves the performance of the TAS
- C. It requires a higher skill level to implement
- D. It ensures that any scripting method will be supported
Answer: A
NEW QUESTION # 36
Consider a TAS that exclusively uses the APIs of a SUT. To make this work, significant changes have been required to the SUT by adding a set of dedicated test interfaces to the APIs. All the automated tests will use these test interfaces when interacting with the SUT. Assume that you are currently verifying the correctness of the automated test environment and test tool setup.
Which of the following would you expect to be the MOST specific risk associated with this scenario?
- A. False alarms, that are unlikely to occur in the real world, will be observed during testing
- B. The automated test cases will not contain the expected result
- C. The process of configuring the TAS will be error-phone due to manual intervention
- D. The connectivity from the TAS to the dedicated test interfaces will not work
Answer: A
NEW QUESTION # 37
Consider a TAS associated to dynamically changing software frequent releases. Your goal is to determine the amount of effort required to maintain the automated tests of the regression test suite for each new release of the SUT.
What is the MOST important metric to collect to achieve your goal?
- A. The code coverage achieved with the automated tests, for each new release of the SUT
- B. The number of automated tests which fail because of a single software defect, for each new release of the SUT
- C. The time it takes to execute all the automated tests, for each new release of the SUT.
- D. The number of automated tests requiring maintenance, for each new release of the SUT.
Answer: B
NEW QUESTION # 38
A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?
- A. It is generally more difficult to automate test cases for a new feature as the development has not yet started
- B. The test automation engineer should work with the business analysts to ensure the new feature is testable
- C. The introduction of a new feature could require updates or additions to the testware components
- D. Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort
Answer: C
NEW QUESTION # 39
You are using a gTAA to create a TAS for a project. The TAS is aimed at automatically and executing test cases based on a use-case Modeling approaching that uses UML as a modeling language. All the interaction between TAS and SUT will only be at the API and GUI level.
Which of the following components of the gTAA would you EXCLUDE from the TAS?
- A. The Test execution component of the test generation layer
- B. The test reporting component of the test execution layer.
- C. The test execution (test engine of the test execution layer
- D. The Command Line Interface (CLI) component of the test adaptation layer
Answer: D
NEW QUESTION # 40
What represents good practice when automating a manual regression test suite?
- A. Remove inter-dependencies between tests to reduce automation failures and costly error analysis.
- B. Once a manual test has been automated, execute it immediately to Identify whether it operates correctly.
- C. Test data shared between tests should, where feasible, be stored and accessed from a single source to avoid duplication or introduction of error.
- D. All existing manual tests should be decomposed into several smaller automated tests to reduce functional overlap.
Answer: B
NEW QUESTION # 41
Consider the following layers of the gTAA structure:
a. Test generation layer
b. Test definition layer
c. Test execution layer
d. Test execution layer
Consider the following capabilities associated with these layers.
Acquire all the necessary resources before each test and release all after run, in order to avoid interdependences between test Allow the automated test scripts on an abstract level to interact with components, configurations and interfaces of the SUT.
Design test directives that allow configuring the algorithms used to automatically produce the test cases a given model of the SUT.
Allow the definition and implementation of test cases and data by means of templates and/or guidelines.
Which of the following BEST matches each layer with the appropriate capability?
- A. a-4, b-3, c-2, d-1
- B. a-3, b-4, c-2, d-1
- C. a-3, b-4, c-1, d-2
- D. a-4, b-3, c-1, d-2
Answer: A
NEW QUESTION # 42
Which of the following statements BEST describe aspects of the SUT to consider when designing a TAA?
- A. All the external test interfaces of the SUT should be removed prior to the product release
- B. All the interface of the SUT affected by the tests should be controllable by the TAA
- C. All the interaction between SUT and TAS should be logged with the highest level of detail
- D. All the internal test interfaces of the SUT should be removed prior to the product release
Answer: C
NEW QUESTION # 43
You are currently designing the TAA of a TAS. You have been asked to adopt an approach for automatically generating and executing test cases from a model that defines the SUT. The SUT is a state-based and event-driven that is described by a finite-state machine and exposes its functionality via an API. The behavior of the SUT depends on hardware and communication links that can be unreliable.
Which of the following aspects is MOST important when designing the TAA in this scenario?
- A. Looking for tools that allows direct denoting of exceptions and actions depending on the SUT events.
- B. Looking for tools that allow performing setup and teardown of the test suites and the SUT.
- C. Adopting a test definition strategy based on use case/exception case coverage for the definition layer.
- D. Adopting a test definition strategy based on classification tree coverage for the test definition layer.
Answer: B
NEW QUESTION # 44
The Test Automation Manager has asked you to provide a solution for collecting metrics from the TAS that measures code coverage every time the automated regression test pack is run. The metrics must be trend based to ensure that the scope of the regression test pack continues to reflect enhancements made to the SUT - coverage must not drop and should ideally increase. The solution must be as automated as possible to avoid unnecessary manual overheads and errors.
Which of the following approaches would BEST meet these requirements?
- A. The automated testware would record the pass/fail rate of each regression test case, export the data to a pre-formatted Excel spreadsheet that automatically updates a trend analysis success rate bar chart and emails it to stakeholders.
- B. The automated testware would record overall code coverage for each run, export the data to a pre-formatted Excel spreadsheet that automatically updates a trend analysis bar chart for you to distribute to stakeholders.
- C. Test automation cannot measure code coverage for the SUT, only the code for the automation tools and scripts. The automated test cases would need to be run manually with a code coverage and reporting tool running in the background.
- D. The automated testware would record overall code coverage for each run and add the figure to a new row in a pre-formatted Excel spreadsheet. You would then present the spreadsheet to stakeholders so they could look for changes in coverage.
Answer: B
NEW QUESTION # 45
You are implementing test automation for a project that has a business critical application A test execution tool is being used to run automated regression tests. The results from the test execution tool are very important and need to be 100% accurate.
You want to merge the test automation results with the test management system that also records the manual test results so that managers can make informed decisions about the progress quickly.
Which layer of the gTAA will be used to ensure the proper reporting occurs and the interfaces to the test management system are handled?
- A. The adaptation layer
- B. The reporting layer
- C. The logging layer
- D. The execution layer
Answer: B
NEW QUESTION # 46
New features have been added for the current release of a SUT.
Which action would NOT be appropriate for the TAE to perform when evaluating the impact on the TAS?
- A. Review existing keywords to see if they need to be modified.
- B. Gather feedback from the Business Analysts to determine if the current TAS will meet the needs of the new features.
- C. Evaluate compatibility with existing test tools and, where necessary, identify alternative solutions.
- D. Run existing automated tests against the updated SUT to verify and record any changes to their correct operation.
Answer: B
NEW QUESTION # 47
You have been asked to implement test automation for a project that is not meeting its deadlines. After further analysis you discover that the manual testers are not able to keep up with the new feature testing because the regression testing is taking 75% of their time. As a result, the new features are being released with many defects and customers are complaining about the quality.
Given this information, what metric SHOULD you be tracking to show the value of test automation for this project?
- A. Equivalent Manual Test Effort for the automated tests.
- B. Number of defects found by test automation.
- C. Percentage of builds accepted/rejected by the automated tests.
- D. Percentage of code covered by the test automation.
Answer: A
NEW QUESTION # 48
You are working as a TAE for a company who have been using a web test execution tool for a number of years. The tool has been used successfully on ten web applications in the past.
The company are developing a new web application which has a friendly User Interface, but the developers have used an object throughout the application which the tool is unable to recognise. As a result, you have no way of capturing the object or verifying the contents using the automation tool.
What is the first thing you should do about this problem?
- A. See if the application can be run on a desktop and if the object can be recognised on the desktop by the tool.
- B. Ask the developers to remove the object and replace it with some text fields
- C. Ask the developers if they can change the object to something that can be recognised by the tool
- D. Investigate whether the object can be recognised by other test execution tools in the market
Answer: D
NEW QUESTION # 49
You are working on a TAS for standalone application. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements include menus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?
- A. Verify whether the GUI identification depends on the browser.
- B. Adopt an approach that uses the coordinates of the GUI elements instead
- C. Verify the testability support with the providers of the third party components
- D. Verify whether naming standards for variables and have been defined for the current automation solution
Answer: C
NEW QUESTION # 50
You have been asked to determine a TAS for a new release of a SUT, test should be automated wherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?
- A. Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.
- B. Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.
- C. Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.
- D. Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.
Answer: C
NEW QUESTION # 51
......
ISTQB CT-TAE (Certified Tester Test Automation Engineer) Exam is a globally recognized certification program designed for software testers who specialize in test automation. Certified Tester Test Automation Engineer certification is ideal for professionals who wish to demonstrate their knowledge and skills in test automation techniques and tools. The CT-TAE certification is suitable for both novice testers who are starting their careers in automation and experienced testers who wish to validate their knowledge.
Passing Key To Getting CT-TAE Certified Exam Engine PDF: https://learningtree.actualvce.com/ISTQB/CT-TAE-valid-vce-dumps.html