Practice with 2V0-41.20 Dumps for VCP-NV Certified Exam Questions & Answer
REAL 2V0-41.20 Exam Questions With 100% Refund Guarantee
NEW QUESTION # 54
Which CLI command shows syslog on NSX Manager?
- A. get log-file auth.log
- B. show log manager follow
- C. get log-file syslog
- D. /var/log/sysloq/syslog.log
Answer: B
NEW QUESTION # 55
Which tool could be used to configure BGP on a Tier-0 Gateway?
- A. API
- B. NSX CLI
- C. PowerShell
- D. ESX CLI
Answer: B
NEW QUESTION # 56
Which command is used to change the NSX CU administrator password?
- A. set user admin password <old-password> <new-password>
- B. set user admin password <password> old-password <old-password>
- C. set user administrator password <password> old-password <old-password>
- D. set user administrator password <old-password> <new-password>
Answer: B
Explanation:
To change the password of an account run: set user admin password my-new-pwd old-password my-old-pwd
NEW QUESTION # 57
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. DNAT
- B. 1:1 NAT
- C. Reverse NAT
- D. SNAT
Answer: D
NEW QUESTION # 58
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager log-level debug
- B. set service manager logging-level debug
- C. set service nsx-manager logging-level debug
- D. set service nsx-manager log-level debug
Answer: A
NEW QUESTION # 59
An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)
- A. The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
- B. The virtual machines running on the KVM Transport Node are not connected to the VDS.
- C. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.
- D. The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
- E. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
Answer: A,E
NEW QUESTION # 60
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager log-level debug
- B. set service manager logging-level debug
- C. set service nsx-manager logging-level debug
- D. set service nsx-manager log-level debug
Answer: B
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html
NEW QUESTION # 61
Which CLI command shows syslog on NSX Manager?
- A. get log-file auth.log
- B. /var/log/sysloq/syslog.log
- C. show log manager follow
- D. get log-file syslog
Answer: D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E3D-92AFB9D5E973.html
NEW QUESTION # 62
In a NSX-T Data Center environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)
- A. Add an additional vNIC to the NSX Edge node.
- B. Configure ECMP on the Tier-0 gateway.
- C. Configure a Tier-1 gateway and connect it directly to the physical routers.
- D. Deploy Large size Edge node/s.
- E. Configure NAT on the Tier-0 gateway.
Answer: B,D
NEW QUESTION # 63
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A. set time-server
- B. set timezone
- C. get timezone
- D. set ntp-server
Answer: D
NEW QUESTION # 64
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. MTU 1600
- B. MTU 1500
- C. vSphere Distributed Switch 6.5
- D. vSphere Distributed Switch 7.0
- E. MTU 1400
Answer: A,D
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-BA34FB2A-6780-41C5-B895-F37E5A7B7BAE.html
NEW QUESTION # 65
Which three services are compatible with VRF Lite? (Choose three.)
- A. VPN
- B. NAT
- C. Intrusion Detection
- D. Load Balancer
- E. DHCP
Answer: A,B,D
NEW QUESTION # 66
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch <Local-Switch-UUID> status
- B. get logical-switches
- C. get logical-switch <Logical-Switch-UUID>
- D. get logical-switch status
Answer: C
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20logical-switch%20%3Clogical-switch-id%3E%202
NEW QUESTION # 67
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.
Which two NAT rule types are supported for this configuration? (Choose two.)
- A. 1:1 NAT
- B. Destination NAT
- C. Source NAT
- D. Reflexive NAT
- E. Port NAT
Answer: B,C
NEW QUESTION # 68
A security administrator needs to configure a firewall rule based on the domain name of a specific application. Which field in a distributed firewall rule does the administrator configure?
- A. Service
- B. Source
- C. Profile
- D. Policy
Answer: C
NEW QUESTION # 69
......
PDF Download VMware Test To Gain Brilliante Result!: https://learningtree.actualvce.com/VMware/2V0-41.20-valid-vce-dumps.html